Queen Intex Deluxe Air Mattress Frame Raised Air Bed

Maybe the best of the air mattress frames type airbed mattress. Quality tested 22.8 gauge waterproof flocked Super-Tough laminated top with 15 gauge vinyl beams.

18.4 gauge Super-Tough laminated sides and bottom Bed Frame

Quality tested 20.8 gauge waterproof flocked top with 15 gauge vinyl beams and 18.4 gauge Super-Tough laminated sides and bottom.

Queen-sized mattress is raised 16″ from the floor for convenience. Flocking on top of laminated sides and sleeping surface for extra comfort and durability. The airbed mattress is constructed with intersecting cross beams that create a uniquely comfortable sleeping experience that is firm, yet soft.

Bed sheets can tuck easily and securely into the bed frame. Sturdy backrest for relaxing in comfort. Includes duffel bag with shoulder strap Shelf box.

Queen Intex Deluxe Air Mattress Frame Raised Air Bed Features

• Durable, Affordable, and Convenient
• Portable and Easy to Store
• Great for House Guests or Backyard Sleepovers
• The best airbed for the money, and the most comfortable
• Manufactured by Intex The Leader in Inflatables

Queen Intex Deluxe Air Mattress Frame Raised Air Bed Reviews

Be the first to review this product.

Get It Now

Related posts:

1. Air Mattress Frames
2. Raised Air Mattress
3. Intex Raised Air Bed

Intex Comfort Air Mattress Frame Rising Comfort Queen Airbed

The Comfort Air Mattress Frame Bed is a bed that is so comfortable it can actually be a permanent sleeping solution to a traditional mattress and box spring.

It allows for more support because the mattress is inside a soft, inflated frame. Bed sheets tuck easily and securely into the bed frame. Unique pillowed head board for added comfort.

Easily converts into two separate beds. Compliments any room decor. Two beds in one – Inner mattress pulls out to make two separate beds if desired. Quality tested 20.8 gauge waterproof flocked top and sides with 15 gauge vinyl beams and 16 gauge bottom Queen-sized mattress is raised 15 1/2″ from the floor for convenience.

Airbed frame consists of I-beams for a stable base and tubular chambers on the sides for firmness and support. Includes Hand Held A/C 120 Volt Pump which allows inflating in around 6 minutes total! Bed sheets can tuck easily and securely into the bed frame. Weight Capacity is 600 lbs. Comes with duffle bag for convenient storage.

Intex Comfort Air Mattress Frame Features

• 20.8 gauge flocked top
• 15 gauge vinyl beams
• 16 gauge vinyl bottom
• Hand held AC Pump Included
• Includes duffle bag with shoulder strap

Intex Comfort Air Mattress Frame Reviews

20 of 20 people found the following review helpful:
Great bed, included pump is awful, also frigging huge to store, May 7, 2007
By S. J McCartin (Florida)

I have another intex bed sold under the walmart brand, ozark trail, that has been a great bed so I thought I’d try another. This bed attracts me because of the height, it should be more firm because of the way it’s made and bed sheets should be easier to deal with because there’s something to tuck them into. Fully assembled this thing is closer to king size than queen. The pump that comes with it is just junk, go buy the coleman rechargeable sold at walmart for thirty bucks it inflated this thing four times faster than the [...] pump they give you. You need a huge amount of space to set this up. It went up easy enough, folding it up so it would go back into the bag was tough, they should give you a much larger bag for it. I like it, very comfortable and the pillow is not built in so you won’t have problems using your favorite pillow. The two bad points, the pump sucks and the bag they give you is too small otherwise workmanship is the same as on my ozark trail bed and the valve setup works great to quickly deflate it. This thing weighs a good sixty pounds when deflated so also be aware of that. No problems with it yet, be careful when you purchase mail order because the shipping on a 50-60lb item often ends up being as much as the item, got mine somewhere with free shipping so don’t just look at the price of the bed when you buy it.

18 of 18 people found the following review helpful:
Very comfy and cheap, but has some flaws, December 6, 2007
By M. Johnson “markj99″ (Los Angeles, CA)

We needed a spare bed for occasional use, and a friend who also has one suggested this one to us. That turned out to be a good suggestion!

It’s a queen size, nearly standard height bed that is amazingly comfortable to sleep on. To me, the big plus of this bed is that you can put standard fitted sheets on the mattress, and they’ll stay put, since you can tuck them in, under the mattress (but inside the ‘frame’ part of the system. That’s unusual, because most (all?) inflatable beds I’ve seen require you to just drape the bedding over the bed, and hope it stays put while you sleep.

The pump inflates both parts (mattress and ‘frame’) in around 7 minutes total. It’s not a built-in pump, but that can be a blessing if the pump fails: Friends of ours have a different brand bed with a built-in pump that failed (out of warranty, of course), so they now have a big inflatable bed that they can’t inflate! Plus, a detached pump also allows you to upgrade to another, better pump (as another reviewer suggested.)

But it’s not all roses: There are some problems with this bed. Some of the small problems are that the pump is LOUD, and you need to keep holding it into the inflation port, or it will just pop out. The bed is VERY heavy, although that is good new / bad news, because that implies the vinyl is thick (hence, heavy), but also means you might want to have two people carry it.

The MAJOR problem with this bed is that ours started leaking after about the 10th time we slept on it. Now, at the amortized cost of around $10/night, I didn’t feel too bad about it, since we don’t have to live with, and assign space to, a bed that we rarely use. Plus it was easy to patch with the included patch kit.

But as we kept using it, we kept on getting small leaks. They are NOT holes from cats, or dogs, or poltergeist; but rather appear to be due to a manufacturing defect: All 5 leaks are in same area of the mattress, and all are on the same side of each of 5 different ‘coils’. I can’t say whether we were just ‘unlucky’, or that every bed has the same flawed joinery. But be aware that you may be patching this bed more often than you’d like. Or, you might never have to patch it. I only have the one bed, and so can’t make any inferences.

The bottom line, though, is that I’m pretty happy with this bed, holes and flaws and all. But if you decide to get one, I can offer some tips from my experience with it.

1) Roughen the nozzle of the pump, and the input ports of the bed with 320-400 grade sand paper. That will allow the pump nozzle to stay in the port with little or no assistance.

2) Put a bit of silicone grease on the ‘flapper valves’, and O-rings. That will provide a good seal, with no leakage, and protect the parts from ozone damage. But do NOT use oil based grease: That will destroy the rubber!

3) Put down a cotton mattress pad or blanket on top of the mattress before you put sheets on it. That lets air seep in, under your body, instead of being right on top of the vinyl surface. Sure, the flocked surface of the mattress helps with that, but a breathable pad is absolutely the way to go.

4) When you are finished using the bed, and need to store it away, don’t try to stuff it back into the bag! That is WAY not worth the effort. Just get a bigger cloth bag, or box for the thing.

4) If the mattress does get a hole, finding it can be a real challenge. It’s far too unwieldy to dunk it into a bucket to look for bubbles, and you can’t easily smear the entire thing with soapy water. What does work, is to pump up the bed to a ‘firm’ level, and lie face down on the bed, and move your FACE — not your hand — over the surface of the mattress, in a regular search pattern. I found that my face (and lips, in particular) are very good at feeling small air currents coming from tiny holes. When I put my hand over a hole, I felt NOTHING.

When you find the hole, clean the area with isopropyl alcohol (90%, or higher) before you glue the patch on. Cut the patch into a shape with rounded corners, smear it with glue, put it over the hole, and then clamp it down for at least 1 hour. Allow the patch to dry overnight before you blow up the bed.

update: The first couple times I used this I was satisfied with the way it held air, the last time I used it I seemed to always be pumping it up. I think you need to pay special attention and make sure you’ve got the valves closed tightly. It’s way tooooo big to really use anyplace with limited space I took it to a cabin on a retreat and it made it really hard to walk past it, just too big, very comfortable but it’s really better for setting up in your own tent or your own room too large otherwise.

Get It Now

Related posts:

1. Air Mattress Frames
2. Intex Air Mattress Queen
3. Intex 66955E Air Mattress